Description

SICK DFS60B-S4PK10000

SICK DFS60B-S4PK10000

• Performance

  Pulses per revolution	10.000 1)
  measuring step	90° electric/pulses per revolution
  Measuring step deviation for non-binary line numbers	± 0,01°
  Error limits	± 0,05°

  • ¹⁾ See. maximum rev review.

• Interfaces

  Communication interface	Incremental
  Communication interface detail	TTL / HTL
  Factory settings	Factory set TTL output level
  Number of signal channels	6 channels
  programmable	✔
  Start time	32 ms 1) 30 ms
  Output frequency	≤ 600 kHz
  load current	≤ 30 mA
  Power consumption	≤ 0.7 W (No Load)

  • ¹⁾ Mechanical zero pulse width.

• electrical data

  Connection type	Cable, 8-wire, universal, 1.5 m 1)
  Supply voltage	4,5 … 32 V
  Reference signal, number	1
  Reference signal, position	90°, electrical, logical combination with A and B
  Reverse polarization protection	✔
  Short-circuit resistance of outputs	✔ 2) 3)
  MTTFd: Mean time to dangerous failure	300 years (EN ISO 13849-1) 4)

  • ¹⁾ The universal cable connection is positioned so that it can be inserted without kinks in the radial or axial direction.
  • ²⁾ TTL programming with ≥ 5.5 V: Short-circuit allowed against another channel or GND for a maximum of 30 sec.
  • ³⁾ TTL or HTL programming with ≥ 5.5 V: Short-circuit allowed against another US channel or GND for a maximum of 30 sec.
  • ⁴⁾ This product is a standard product, it does not contain any safe components defined in the machinery directives. Calculation of structural elements based on nominal load, average ambient temperature 40 °C, frequency of use 8760 h/a. All electronic failures are considered dangerous failures. For detailed information, see Document No. 8015532.

• Mechanical data

  Mechanical application	Shaft, Surface mount flange
  Shaft diameter	10 mm
  shaft length	19 mm
  Weight	+ 0,3 kg
  Shaft material	Stainless steel
  flange material	Aluminum
  Body material	Aluminum casting
  Starting torque	0,5 Ncm (+20 °C)
  operating torque	0,3 Ncm (+20 °C)
  permissible spindle load	80 N (radial) 40 N (straight)
  Working speed	≤ 9.000 min⁻¹ 1)
  moment of inertia of the rotor	6,2 gcm²
  Bearing service life	3,6 x 10^10 devir
  Angular acceleration	≤ 500.000 rad/s²

  • ¹⁾ Pay attention to self-heating of 3.3 K at 1,000 min⁻¹ when designing the operating temperature range.

SICK DFS60B-S4PK10000

DFS60B-S4PK10000

DFS60B-S4PK10000 SICK 

SICK DFS60B-S4PK10000