Description

VIPA FM 050-1BB30 8DO-24VDC

050-1BB30 – Function modules | Counter modules

Order no.	050-1BB30
Type	FM 050
Module ID	08C4 388B
General information
Note	–
Features	2x Counter 32 Bit (AB) DC 24 V Up to 400 kHz
Current consumption/power loss
Current consumption from backplane bus	75 mA
Power loss	0.9 W
Technical data digital inputs
Number of inputs	4
Cable length, shielded	100 m
Cable length, unshielded	–
Rated load voltage	DC 20.4…28.8 V
Reverse polarity protection of rated load voltage	–
Current consumption from load voltage L+ (without load)	15 mA
Rated value	DC 20.4…28.8 V
Input voltage for signal “0”	DC 0…5 V
Input voltage for signal “1”	DC 15…28.8 V
Input voltage hysteresis	–
Signal logic input	–
Frequency range	–
Input resistance	–
Input current for signal “1”	3 mA
Connection of Two-Wire-BEROs possible
Max. permissible BERO quiescent current	0.5 mA
Input delay of “0” to “1”	0.8 µs
Input delay of “1” to “0”	0.8 µs
Number of simultaneously utilizable inputs horizontal configuration	4
Number of simultaneously utilizable inputs vertical configuration	4
Input characteristic curve	IEC 61131-2, type 1
Initial data size	12 Byte
Technical data digital outputs
Number of outputs	–
Cable length, shielded	–
Cable length, unshielded	–
Rated load voltage	–
Current consumption from load voltage L+ (without load)	–
Output delay of “0” to “1”	–
Output delay of “1” to “0”	–
Minimum load current	–
Lamp load	–
Parallel switching of outputs for redundant control of a load	–
Parallel switching of outputs for increased power	–
Actuation of digital input	–
Switching frequency with resistive load	–
Switching frequency with inductive load	–
Switching frequency on lamp load	–
Internal limitation of inductive shut-off voltage	–
Short-circuit protection of output	–
Trigger level	–
Number of operating cycle of relay outputs	–
Switching capacity of contacts	–
Output data size	4 Byte
Technical data counters
Number of counters	2
Counter width	32 Bit
Maximum input frequency	100 kHz
Maximum count frequency	400 kHz
Mode incremental encoder
Mode pulse / direction
Mode pulse	–
Mode frequency counter	–
Mode period measurement	–
Gate input available	–
Latch input available	–
Reset input available	–
Counter output available	–
Status information, alarms, diagnostics
Status display	yes
Interrupts	no
Process alarm	no
Diagnostic interrupt	no
Diagnostic functions	no
Diagnostics information read-out	possible
Module state	green LED
Module error display	red LED
Channel error display	none