Description

SICK DBS60E-TBEK01000

SICK DBS60E-TBEK01000

• Performance

  Pulses per revolution	1.000
  measuring step	≤ 90° electricity/pulses per revolution
  measurement deviation	± 18° / Pulses per revolution
  Error limits	Deviation in measuring step x 3
  Detection degree	≤ 0,5 ± %5

• Interfaces

  Communication interface	Incremental
  Communication interface detail	HTL / Push pull
  Number of signal channels	6 channels
  Start time	< 5 ms 1)
  Output frequency	+ 300 kHz 2)
  load current	≤ 30 mA per channel
  Power consumption	≤ 1 W (No Load)

  • ¹⁾ After this time, valid signals can be read.
  • ²⁾ Up to 450 kHz on request.

• electrical data

  Connection type	Cable, 8-wire, universal, 1.5 m 1)
  Supply voltage	10 … 27 V
  Reference signal, number	1
  Reference signal, position	90°, electrical, logical combination with A and B
  Reverse polarization protection	✔
  Short-circuit resistance of outputs	✔ 2)
  MTTFd: Mean time to dangerous failure	500 years (EN ISO 13849-1) 3)

  • ¹⁾ The universal cable connection is positioned so that it can be inserted without kinks in the radial or axial direction.
  • ²⁾ Short-circuit allowed against another US channel or GND for a maximum of 30 sec.
  • ³⁾ This product is a standard product, it does not contain any safe components defined in the machinery directives. Calculation of structural elements based on nominal load, average ambient temperature 40 °C, frequency of use 8760 h/a. All electronic failures are considered dangerous failures. For detailed information, see Document No. 8015532.

• Mechanical data

  Mechanical application	Through hollow shaft, Pre-compression
  Shaft diameter	8 mm
  Flange type / torque support	Torque support 2-sided, long hole, hole circle 63 mm- 83 mm
  Weight	+ 0,25 kg 1)
  Shaft material	Stainless steel
  flange material	Aluminum
  Body material	Aluminum
  cable material	PVC
  Starting torque	+ 0,5 Ncm (+20 °C)
  operating torque	0,4 Ncm (+20 °C)
  Permissible static spindle movement	± 0,3 mm (radyal) ± 0.5 mm (straight) 2)
  Permissible dynamic spindle movement	± 0,1 mm (radyal) ± 0.2 mm (straight) 2)
  Working speed	6.000 min⁻¹ 3)
  Maximum number of revolutions	9.000 min⁻¹ 4)
  moment of inertia of the rotor	50 gcm²
  Bearing service life	3,6 x 109 tur
  Angular acceleration	≤ 500.000 rad/s²

  • ¹⁾ Based on encoder with male connector or cable with male connector.
  • ²⁾ Does not apply to C and K torque supports.
  • ³⁾ Pay attention to self-heating of 2.6 K at 1,000 min⁻¹ when designing the operating temperature range.
  • ⁴⁾ Maximum speed that will not cause mechanical destruction of the encoder. It can affect uptime and signal quality. Please consider the maximum output frequency.

SICK DBS60E-TBEK01000

DBS60E-TBEK01000

DBS60E-TBEK01000 SICK 

SICK DBS60E-TBEK01000