Description
SCHMERSAL BNS260-11ZG-ST-R
SCHMERSAL BNS260-11ZG-ST-R
SCHMERSAL MAGNETIC SAFETY SENSOR
- Connector M8 x 1, 4-pole
- Thermoplastic enclosure
- small body
- Concealed mounting possible
- 26 mm x 36 mm x 13 mm
- Long life
- no mechanical wear
- Insensitive to transverse misalignment
- Insensitive to soiling
Ordering data
| Product type description | BNS 260-11ZG-ST-R |
| Article number (order number) | 101184367 |
| EAN (European Article Number) | 4030661321646 |
| eCl@ss number, version 11.0 | 27-27-24-02 |
| eCl@ss number, version 9.0 | 27-27-24-02 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
Approvals – Standards
| Certificates | TÜV BG cULus EAC |
General data
| Standards | BG-GS-ET-14 EN IEC 60947-5-3 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | Magnetic drive |
| Installation conditions (mechanical) | quasi-flush |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 18 g |
General data – Features
| Integral system diagnostics, status | Yes |
| Number of normally closed (NC) | 1 |
| Number of normally open (NO) | 1 |
| Number of safety contacts | 2 |
| Safety classification |
| Standards | EN ISO 13849-1 |
| Mission time | 20 Year(s) |
Safety classification – Safety outputs
| B10D– Value Normally-closed contact/Normally open contact (NC/NO) | 25,000,000 Operations |
Mechanical data
| Actuating element | Magnet |
| Door hinge | Right |
| Direction of motion | Head-on to the active surface |
Mechanical data – Switching distances according EN IEC 60947-5-3
| Note (Switching distance Sn) | Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Assured switching distance “ON” Sao | 5 mm |
| Assured switching distance “OFF” Sar | 15 mm |
Mechanical data – Connection technique
| Termination | Connector M8 |
| Tightening torque of electrical connection | 0.3 Nm |
Mechanical data – Dimensions
| Length of sensor | 13 mm |
| Width of sensor | 26 mm |
| Height of sensor | 36 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +70 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
Ambient conditions – Insulation values
| Rated insulation voltage Ui | 75 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
Electrical data
| Required rated short-circuit current | 100 A |
| Switching voltage, maximum | 24 VDC |
| Switching current, maximum | 0.01 A |
| Switching capacity, maximum | 0.2 W |
| Switching frequency, maximum | 5 Hz |
Status indication
| Note (Integral System Diagnostics, status ) | The LED is illuminated when the guard is closed. |
Scope of delivery
| Scope of delivery | Actuators must be ordered separately. |
Accessory
| Recommendation (actuator) | BPS 260 |
| Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Note
| Note (General) | The number in brackets indicate the PIN number of the connector. |
Wiring example
| Note (Wiring diagram) | The contacts S13-S14 and S21-S22 must be integrated in the safety circuit. |
BNS260-11ZG-ST-R
BNS260-11ZG-ST-R SCHMERSAL
SCHMERSAL BNS260-11ZG-ST-R
Reviews
There are no reviews yet.